Your doctor has just ordered a test called an
EMG. EMG stands for Electromyogram which loosely translated means
electrical testing of muscles but in fact has come to mean
electrical testing of nerves and muscles. The EMG is performed by a
specialist, the Electromyographer, who is usually a Neurologist or a
Physiatrist. Parts of the test (the nerve conductions) may be
performed by a specially trained technician. It is an in-office
procedure and does not require hospitalization. On average, an EMG
takes anywhere between 30 minutes and 2 hours, depending on how
extensive a testing your doctor orders on you. It can be done at any
time during the day and, with few exceptions, does not require any
special preparation.
Sometimes EMGs are thought to be a treatment
of some sort, or a type of acupuncture. This is not true; an EMG is
only a test, much like an EKG or an X-ray are tests and not
treatments.
What are some problems for which EMGs are
ordered?
EMGs are usually ordered when patients are having problems
with their muscles or nerves. They test the nerves and muscles of
the body’s extremities, looking for a problem in either one of these
areas. An EMG may be ordered to see if you have a pinched nerve in
the back or the neck. If you have tingling or numbness in your arms
or legs, an EMG may show if you have a nerve entrapment somewhere or
a nerve injury. Weakness of the muscles or “fatigue” (tiredness) may
be indicative of nerve or muscle disease and require an EMG. There
are many other medical problems that might suggest the need for an
EMG. If you have any doubts as to why you need this test, ask your
doctor.
What happens during an EMG?
During this test, you will be lying on an examination table,
next to an EMG machine (which looks like a desktop or laptop
computer). The test consists of two parts, though at times one may
be done without the other. The first part is called Nerve Conduction
Studies. In this part some brief electrical shocks are delivered to
your arm or leg in an effort to determine how fast or slowly your
nerves are conducting the electrical current and therefore in what
state of health or disease they may be. You see, a nerve works
something like an electrical wire. If you want to see if the wire is
functioning properly, the easiest thing to do is to run electricity
through it. If there are any problems along its length, you will
know it by a failure of the current to go through. To do this, the
doctor will attach small recording electrodes to the surface of one
part of your limb, and will touch your skin at another point with a
pair of electrodes delivering the shock. When this happens, you will
feel a tingling sensation that may or may not be painful. Between
the brief shocks you will not feel pain. As there are several nerves
in each extremity which need to be tested, the procedure is repeated
3 or 4 times or more per extremity studied. The amount of current
delivered is always kept at a safe level. Patients wearing
pacemakers or other electrical devices need not worry since this
current will rarely interfere with such devices. During the nerve
conduction study, the doctor or the technician performing the study
will occasionally be pausing to make calculations and measurements.
The second part of the test is called Needle
Examination and as the name implies, involves some needle sticking.
The needles used are thin, fine and about one and a quarter inches
long. This part tests the muscle to see if there has been any damage
to it as a result of the nerve problem or if the disease involves
the muscle itself rather than the nerve. Usually 5 to 6 muscles are
sampled in one extremity, but occasionally, if you have problems in
more than one area, additional muscles may need to be studied. The
needle is usually inserted in the relaxed muscle and moved inside
gently in order to record the muscle activity. When this is done,
you will be able to hear the sound of the muscle activity amplified
by the EMG machine; it will sound something like radio static. The
painful part of this section is when the needle is first inserted
through the skin since all of the pain receptors are located in this
area. Once inside the muscle, the sensation is usually perceived as
discomfort or pressure rather than pain. During the needle exam, no
electrical shocks are delivered. Also, since the needle probe is
used here only as a recording device, no injections are given
through the needle into the muscle. On the average, a muscle can be
sampled in 2 to 5 minutes though this may vary with the type of
problem being investigated.
How long does an EMG take?
The nerve conduction part of the test usually takes longer
than the needle exam because one needs to make calculations and
measurements during it. On average, if one extremity is studied, the
nerve conductions take anywhere between 15 and 30 minutes. The
needle exam for one extremity usually takes 15 to 20 minutes. You
can count on being in the examination room for about one hour if
only one extremity is requested; longer if more extremities need to
be tested.
What kind of preparations are necessary
for an EMG?
Few preparations are needed on the day you have an EMG. You do
not need to fast, or eat any particular kinds of food before the
test. You can drive yourself to and from the test, so you do not
need to bring a friend or a relative with you, any more than you
would say if you went to the dentist. You can count on resuming your
regular activity after the test is completed. As for clothing, it is
not as much what you wear as it is what you don’t wear. Since in a
great majority of cases the low back and buttocks area may need to
be studied or in cases of neck problems, the back of the neck and
shoulder areas studied, it is best not to wear clothes which will
interfere with access to these areas.
With few exceptions, you may continue taking
medication prescribed by your physician as ordered without this
interfering with the EMG. However, if you are taking a blood
thinner, you should notify the Lab where your EMG is being done,
since in that case the needle part of the test may cause bleeding
inside the muscle. Also if you are on any medication for Myasthenia
Gravis such as Mestinon or other, your medication may interfere with
the test, so you should also notify the Lab. If you have any doubts
about other medications you are taking, it is best to check with the
Lab to be on the safe side.
Can I ask for some pain medication?
Different labs have different policies about pain medication.
Some physicians may recommend you take two Aspirins or Tylenols
before the test. Others may mail you a prescription drug to take an
hour before the test. Sometimes you may be given an injection prior
to the test. It is common however, that no sedation is given in any
form since in most instances, patients wish to return to work or
other regular activity after the test is completed. Another reason
for not giving sedation is that you should always have someone
accompany you to drive you home after receiving sedation and this is
not always easy to arrange.
How soon will I find out the results?
Though the physician performing the test has a general idea of
what the findings are during the test, the full results are only
arrived at after more calculations and measurements are performed
after the end of the test. The results are therefore usually not
ready until later that day or even the next in complicated cases.
They are usually not released directly to the patient. Instead they
will be conveyed to the referring physician since he or she has to
assess the results in light of the patient’s other findings.
How much will an EMG cost?
As a rule the more areas you need studied, the more the test
will cost. However costs may vary from one physician to another and
is different in different states. It is always best to inquire about
cost with your physician.
Most insurance policies cover EMGs,
though frequently the coverage is not 100% and the primary care or
insurance physician will have to OK it before it can be ordered. It
is best to have your doctor’s office find out what kind of coverage
you have for an EMG.
|